Accelerating While Cruise Control Is Active: Notes

There are three ways of increasing vehicle speed when cruise control is active:

• Temporarily increase vehicle speed (e.g. when overtaking another vehicle).
• Increase vehicle set speed in 1 mph (1.5 km/h) increments.
• Increase vehicle set speed.

To temporarily increase vehicle speed press the accelerator pedal until the desired speed is reached. When the accelerator pedal is released, the vehicle coasts back to the set speed. When it reaches the set speed, cruise control operation continues.

To increase the vehicle set speed in 1 mph (1.5 km/h) increments, tap the SET+ switch. Each tap on the switch increases vehicle speed.

To increase the vehicle set speed, press and hold the SET+ switch until the desired set speed is reached.

The vehicle set speed will increase if the following conditions are met:

• The vehicle is under cruise control operation.
• Vehicle speed is between 28-125 mph (45-200 km/h).
• The brake pedal is not pressed.
• The clutch pedal is not pressed (manual gearbox only).
• The gearbox is not in park, reverse or neutral (automatic gearbox only).