ECU - Cruise Control

ECU - Cruise control


Remove
1. Remove fixings securing fascia RH closing panel and remove panel.







2. Remove 2 fixings and remove 'A' post lower trim.







3. Remove 2 nuts and remove ECU from studs.
4. Disconnect multiplug from ECU and remove ECU.

Refit
1. Position new ECU and connect multiplug.
2. Fit ECU to studs and secure with nuts.
3. Fit lower trim panel to 'A' post and secure with fixings.
4. Fit closing panel and secure with fixings.
5. Programme the ECU using TestBook.