Vacuum Control Unit

Vacuum Control Unit - Up to 03MY

Remove







1. Disconnect vacuum hose from actuator.







2. Disconnect multiplug from vacuum control unit
3. Release 3 rubber mountings securing control unit, and remove from mounting bracket.
4. Remove vacuum hose from control unit.

Refit
1. Position vacuum hose to control unit.
2. Position control unit and secure mountings.
3. Connect multiplug and vacuum hose.

Vacuum Control Unit - From 03MY

Remove







1. If fitted: Remove 2 nuts securing heat shield and remove heat shield.







2. Disconnect vacuum hose from actuator.







3. Disconnect multiplug from control unit.
4. Release 3 rubber mounting securing control unit to mounting bracket and remove control unit.

Refit
1. Position control unit and secure mountings.
2. Connect multiplug and vacuum hose.
3. If fitted: Fit heat shield, fit nuts and tighten to 10 Nm (7 lbf.ft).