Lifting And Towing: Lifting: Notes
The following instructions must be carried out before raising the vehicle off the ground.
- Use a solid level ground surface.
- Apply hand brake.
- Select 'P' on automatic gearbox selector.
CAUTION:
If the propeller shafts are to be removed, reference must be made to the relevant operation in DRIVESHAFTS & UNIVERSAL JOINTS
.
To avoid damage occurring to the under body components of the vehicle the following jacking procedures must be adhered to.
DO NOT POSITION JACKS OR AXLE STANDS UNDER THE FOLLOWING COMPONENTS:
- Body structure other than approved jacking points
- Bumpers
- Fuel lies
- Fuel tank
- Brake lines
- Front or rear suspension arms
- Transfer box
- Steering linkage
- Front or rear differential units
- Engine sump
- Automatic gearbox
NOTE:
For certain repair operations, it may be necessary to support the engine under the sump. In this case, a block of hardwood or a rubber block should be positioned on the jack lifting cup to protect sump.