Front Wheel Alignment Toe In/Out Adjustment
- Set steering to straight ahead position and ensure pinion timing marks are aligned.
- Mark position of steering ball joints for reference. See Figure. Loosen track rod end locknut.
- Adjust by rotating track rod using hexagon on shaft. DO NOT allow gaiter to twist.
- Recheck front wheel alignment. Tighten track rod end locknut to 55 N.m (40 lbf. ft).
- Connect battery ground lead. See DISCONNECTING & RECONNECTING BATTERY under SERVICE PRECAUTIONS.
CAUTION:
Both track rods must be rotated an equal amount.