Crankshaft Position Sensor: Service and Repair

Sensor - Crankshaft Position (CKP)

Service repair no - 18.30.12

Remove
1. Disconnect battery earth lead.
2. Remove engine acoustic cover.





3. Disconnect CKP sensor multiplug from engine harness.
4. Remove underbelly panel.





5. Remove bolt securing CKP sensor to gearbox housing and remove sensor.

Refit
1. Clean CKP sensor and mating face.
2. Position CKP sensor, fit and tighten bolt to 9 Nm (6.5 ft. lbs.).
3. Fit underbelly panel.
4. Connect CKP sensor multiplug to engine harness.
5. Fit engine acoustic cover.
6. Connect battery earth lead.