Front Drive HALFSHAFTS: Specification
GENERAL SPECIFICATION
| Item | Specification |
|---|---|
| Type | Fully floating, fixed length, solid shafts incorporating constant velocity joints at each end of shaft |
LUBRICANT
| Item | Specification |
|---|---|
| Outboard joint | Use grease supplied with replacement boot kit (Optimol MS139G) |
| Inboard joint | Use grease supplied with replacement boot kit (1 Luber C MS132G) |
GENERAL SPECIFICATION
| Item | Specification |
|---|---|
| Type | Fully floating, solid shafts incorporating 'plug-in' constant velocity joint at inboard end and fixed constant velocity joint at outboard end of shaft |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | ||||
|---|---|---|---|---|---|---|
| (1) Stabilizer bar link nut | 115 | 85 | ||||
| (1) Stabilizer link nut | 115 | 85 | ||||
| (1) Tie rod end ball joint nut | 76 | 56 | ||||
| Brake hose retaining bracket to wheel knuckle bolt | 25 | 18 | ||||
| (1)(2) Halfshaft retaining nut | 230 | 169 | ||||
| Road wheel nuts | 140 | 103 | ||||
|
||||||