Front Wheel Speed Sensor: Installation
WARNING: This page is about a different car, the 2009 Land Rover Range Rover, 2008 Land Rover Range Rover, and 2007 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Install the front wheel speed sensor.
- Apply anti-seize compound to the wheel speed sensor.
- Tighten the bolt to 8 Nm (6 lb.ft)
- Secure the clip.
- Secure the front wheel speed sensor wiring harness.
- Connect the wheel speed sensor electrical connector.
- Secure the electrical connector in the clip.
- Close the electrical connector housing.
- Install the wheel and tire.
- Tighten the wheel nuts to 140 Nm (103 lb.ft).
- Using the approved Land Rover diagnostic system, clear the fault codes from the anti-lock brake system (ABS) module.