Navigation System Digital Versatile Disc (DVD) Unit: Installation
WARNING: This page is about a different car, the 2009 Land Rover Range Rover, 2008 Land Rover Range Rover, and 2007 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Install the navigation DVD unit.
- Connect the coaxial cable connector.
- Connect the electrical connectors.
- Secure the navigation DVD unit.
- Tighten the bolts to 4 Nm (3 lb.ft).
- Install the access panel to the loadspace trim panel LH.
- Connect the battery ground cable. Refer to Specifications .
- Using the Land Rover approved diagnostic equipment, follow the on-screen instructions and configure the navigation DVD unit.