LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2006 >> Range Rover Supercharged >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Control Components) >> Control Components >> Removal And Installation >> In-Vehicle Temperature Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

In-Vehicle Temperature Sensor: Removal

WARNING: This page is about a different car, the 2009 Land Rover Range Rover, 2008 Land Rover Range Rover, and 2007 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fully extend the steering column for access.
  2. Remove the instrument panel access panel.
    • Release the 2 clips.
    GJ0013622
  3. Remove the steering column upper shroud.
    • Release the 6 clips.
    GJ0016989
  4. Remove the steering column lower shroud.
    • Remove the 3 Torx screws.
    • Release the steering column adjustment lever.
    GJ0016990
  5. Remove the steering column side trim panel.
    • Release the clips.
    • Repeat the above procedure for the other side.
    GJ0016991
  6. Release the steering column gaiter panel.
    • Remove the 2 Torx screws.
    • Release the 2 clips.
    GJ0014053
  7. Remove the in-vehicle temperature sensor.
    • Release the 2 clips.
    • Disconnect the electrical connector.
    • Disconnect the hose.
    GJ0014054
scientia non olet · About LEMON Manuals