Blower Control
WARNING: This page is about a different car, the 2006 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
When A/C is selected or the blower speed is manually selected, the ATC module energizes the coil of the blower relay in the battery junction box (BJB). The energized blower relay supplies battery power to the blower motor, which is grounded through the blower control module. The speed of the blower is controlled by a PWM signal from the ATC module to the blower control module. The blower control module regulates the blower motor voltage in relation to the PWM signal.
When the blower is in the automatic mode the ATC module determines the blower speed required from the comfort algorithms. When the blower is in the manual mode, the ATC module operates the blower at one of seven fixed speeds as selected on the control panel.