In-Vehicle Temperature Sensor: Installation
WARNING: This page is about a different car, the 2006 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
- Install the in-vehicle temperature sensor.
- Connect the hose.
- Connect the electrical connector.
- Secure with the clips.
- Install the steering column gaiter panel.
- Secure with the clips.
- Tighten the Torx screws.
- Install the steering column side trim panels.
- Secure with the clips.
- Install the steering column shrouds.
- Tighten the screws.
- Secure with the clips.
- Install the instrument panel access panel.
- Secure with the clips.