Navigation System Display Module: Installation
WARNING: This page is about a different car, the 2006 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
- Install the navigation system display module.
- Connect the electrical connectors.
- Connect the fibre optic connector.
- Tighten the screws.
- Install the center face level vents.
- Tighten the Torx screws.
- Install the instrument panel center reinforcement trim panels.
- Secure the clips.
- Install the audio unit side trim panels.
- Secure the clips.
- Connect the battery ground cable. Refer to Specifications article.