G862187T13 : Check For Installation of Navigation Module
Pinpoint TestsNOTE: Visually inspect for any of the following conditions and rectify any fault identified prior to carrying out any tests on the MOST Network.
^ Any sharp bends in the optical fibre harness (check for this before disturbing any module or connector).
^ Incorrect engagement of any optical connectors
^ Incorrect engagement of any electrical connectors
^ Damage to the optical fibre harness (chafing, abrasion, kinking, cuts, break, etc)
^ Incorrect assembly of the optical network
^ Unless otherwise stated, ensure vehicle ignition status is set to 'ON' when carrying out MOST Network tests.
G862187t13 : CHECK FOR INSTALLATION OF NAVIGATION MODULE
1. Check for installation of Navigation module.
^ Is there a Navigation module installed to vehicle?
->Yes
GO to Pinpoint Test G862187t14.G862187T14 : Check For Failure of Optical Fibre to Navigation Module
->No
GO to Pinpoint Test G862187t16.G862187T16 : Check For Failure of Optical Fibre to Audio Amplifier Module