Remote Driver Utility Module - Venture Cam (RDUM): DTCs

REMOTE DRIVER UTILITY MODULE - VENTURE CAM (RDUM) DTCs

DTC	Description	Possible Causes	Action
U0010-88	Medium Speed CAN Communication Bus - Bus off	Loss of companion control from the integrated head unit, no communication with diagnostic tester	Refer to the electrical circuit diagrams and check the power and ground connections to the module. Using the manufacturer approved diagnostic system, complete a CAN network integrity test. Refer to the electrical circuit diagrams and check the CAN network.
U0184-00	Lost Communication With Radio - No sub type information	Loss of companion control from the integrated head unit, no communication with diagnostic tester	Refer to the electrical circuit diagrams and check the power and ground connections to the module. Using the manufacturer approved diagnostic system, complete a CAN network integrity test. Refer to the electrical circuit diagrams and check the CAN network.
U0300-00	Internal Control Module Software Incompatibility - No sub type information	Remote driver utility module incorrectly configured	Configure the module using the approved diagnostic system.
U3000-44	Control Module - Data memory failure	Remote driver utility module internal RAM memory failure	Renew the module. Refer warranty policies and procedures before renewing a module.
U3000-45	Control Module - Program memory failure	Remote driver utility module calibration/parameter memory failure	Renew the module. Refer warranty policies and procedures before renewing a module.
U3000-46	Control Module - Calibration/parameter memory failure	Remote driver utility module internal flash memory failure	Clear the DTC and retest. If the problem persists, renew the module. Refer warranty policies and procedures before renewing a module.
U3000-47	Control Module - Watchdog/safety microcontroller failure	Remote driver utility module internal watchdog/safety MicroController failure	Clear the DTC and retest. If the problem persists, renew the module. Refer warranty policies and procedures before renewing a module.
U3000-49	Control Module - Internal electronic failure	Remote driver utility module internal electronic failure	Clear the DTC and retest. If the problem persists, renew the module. Refer warranty policies and procedures before renewing a module.
U3000-56	Control Module - Invalid/incomplete configuration	Remote driver utility module invalid/incomplete configuration	Configure the module using the approved diagnostic system.
U3003-62	Battery Voltage - Signal compare failure	Remote driver utility module voltage differs more than ±2V compared to Central Junction Box voltage	Refer to the electrical circuit diagrams and check the power and ground connections to both modules.