Restraints Control Module (RCM): Installation
WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
- Install the RCM.
- Tighten the Torx screws to 10 Nm (7 lb.ft).
- Connect the electrical connectors.
- Position the carpet.
- Install the floor console. Refer to Floor Console article.
- Initiate a new RCM using T4.