Differential Locking Module: Installation
WARNING: This page is about a different car, the 2012 Land Rover Range Rover Sport and 2011 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
- Install the differential locking module.
- Install the bolts and tighten to 10 Nm (7 lb.ft).
- Connect and secure the electrical connectors.
- Install the parking aid module.
- Tighten the nuts to 10 Nm (7 lb.ft).
- Install the rear quarter trim panel. Refer to Rear Quarter Trim Panel .
- Connect the battery ground cable. Refer to Specifications .
- Use T4 to calibrate a new differential locking module.