Rear Wheel Speed Sensor: Removal
WARNING: This page is about a different car, the 2012 Land Rover Range Rover Sport and 2011 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Remove the wheel and tire.
- Disconnect the anti-lock brake system (ABS) sensor electrical connector.
- Release the wiring harness retaining clip.
- Release the wheel speed sensor from the wheel knuckle.
- Release the wiring harness.
- Remove the retaining bolt.
- Remove the wheel speed sensor.
- Release the wiring harness from the 4 clips.
WARNING:
Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.