Programmed Demist
WARNING: This page is about a different car, the 2018 Jaguar XF, 2017 Jaguar XF, and 2016 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
When the maximum demist switch on the ICP is pressed, the ATCM instigates the programmed demist function.
When selected, the ATCM configures the system as follows:
- Automatic mode off
- Selected temperature unchanged
- Air intake set to fresh air
- Air distribution set to windshield
- Blower speed set to level 6
- Windshield and rear window heaters on.
The programmed demist function can be cancelled by one of the following:
- Selecting any air distribution soft key on the touch screen
- Pressing the AUTO switch on the ICP
- A second press of the maximum demist switch
- Switching the ignition OFF.
The blower speed can be adjusted without terminating the programmed demist function.