Differential Locking Module: Installation
WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
- Install the differential locking module.
- Install the bolts and tighten to 10 Nm (7 lb.ft).
- Connect and secure the electrical connectors.
- Install the parking aid module.
- Tighten the nuts to 10 Nm (7 lb.ft).
- Install the rear quarter trim panel. Refer to Rear Quarter Trim Panel article.
- Connect the battery ground cable. Refer to Specifications article.
- Use T4 to calibrate a new differential locking module.