Rear Wheel Speed Sensor: Removal
WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Remove the wheel and tire.
- Disconnect the anti-lock brake system (ABS) sensor electrical connector.
- Release the wheel speed sensor from the wheel knuckle.
- Remove the wheel speed sensor.
WARNING:
Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.