LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Ride And Handling Optimization) >> Ride And Handling Optimization >> Removal And Installation >> Dynamic Response Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Dynamic Response Module: Installation

WARNING: This page is about a different car, the 2012 Land Rover Range Rover Sport and 2011 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the dynamic response module.
    • Connect the electrical connectors.
    • Tighten the 2 bolts to 4 Nm (3 lb.ft).
  2. Install the closing trim panel.
    • Connect the electrical connector.
    • Secure the clip.
    • Tighten the screws.
  3. Install the cowl side trim panel. Refer to Cowl Side Trim Panel .
  4. Initiate a new control module using T4.
scientia non olet · About LEMON Manuals