Ride And Handling Optimization: Specifications
WARNING: This page is about a different car, the 2012 Land Rover Range Rover Sport and 2011 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Dynamic Response fluid | Texaco Cold Climate Fluid 33270 |
| Capacity | 2.4 Liters (4.2 pints) (2.5 US quarts) |
| System pressure | Variable between 3-165 bar dependant on lateral acceleration |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft |
|---|---|---|
| Dynamic Response actuator bleed screw | 15 | 11 |
| Dynamic Response pump bolts | 23 | 17 |
| Fluid pipe banjo bolt | 35 | 26 |
| Dynamic Response pump drive pulley bolts | 22 | 16 |
| Radiator access panel | 10 | 7 |
| Dynamic Response module | 4 | 3 |
| * Front actuator pipes to valve block nuts | 22 | 16 |
| Valve block bolts | 22 | 16 |
| * Rear actuator pipes to valve block nuts | 22 | 16 |
| Dynamic Response fluid pipe securing bracket nuts/bolts | 9 | 7 |
| Valve block filter access plug | 62 | 46 |
| Body mount bolts | 133 | 98 |
| Upper suspension arm to wheel knuckle nut | 70 | 52 |
| Wheel speed sensor | 9 | 7 |
| Brake caliper to wheel knuckle bolt | 275 | 203 |
| Brake hose bracket bolt | 23 | 17 |
| Fluid lines to actuator bolts | 22 | 16 |
| * Stabilizer bar link nut | 175 | 129 |
| Valve block transducer | 25 | 18 |
| Front stabilizer bar to body clamp bolts | 115 | 85 |
| Rear stabilizer bar to body clamp bolts | 62 | 46 |
| LH stabilizer bar to actuator bolts | 120 | 89 |
* New nuts/bolts must be installed