LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR2 HSE >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control System >> Climate Control >> Removal And Installation >> Condenser >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Condenser: Installation

  1. Install the A/C condenser, and tighten the bolt.

    Torque: 10 Nm

    2. CAUTION: Extreme cleanliness must be exercised when handling these components.
    NOTE: Lubricate the O-ring seals with clean refrigerant oil.
  2. Connect the A/C condenser refrigerant lines, tighten the bolts.

    Torque: 10 Nm

  3. Install the PAS cooler and tighten the bolts.

    Torque: 10 Nm

  4. Install the air deflector.
  5. Install the front bumper. Refer to FRONT BUMPER .
  6. Recharge the A/C system. Refer to AIR CONDITIONING (A/C) SYSTEM RECOVERY, EVACUATION AND CHARGING .
  7. Connect the battery ground cable and install the cover. Refer to SPECIFICATIONS .
scientia non olet · About LEMON Manuals