Dynamic Response Module: Installation
WARNING: This page is about a different car, the 2012 Land Rover Range Rover Sport and 2011 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
- Install the dynamic response module.
- Connect the electrical connectors.
- Tighten the 2 bolts to 4 Nm (3 lb.ft).
- Install the closing trim panel.
- Connect the electrical connector.
- Secure the clip.
- Tighten the screws.
- Install the cowl side trim panel. Refer to Cowl Side Trim Panel .
- Initiate a new control module using T4.