LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> Range Rover Supercharged >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Anti-Lock Control - Traction Control >> Anti-Lock Control - Traction Control >> Removal And Installation >> Front Wheel Speed Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Wheel Speed Sensor: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. Disconnect the battery ground cable. Refer to Specifications .
    2. WARNING: Make sure to support the vehicle with axle stands.
  2. Raise and support the vehicle.
  3. Remove the front wheel and tire.
    • Torque: 140 Nm
    GJ0016390
    4. CAUTION: Before disconnecting or removing the components, ensure the area around the joint faces and connections are clean and dry. Plug open connections to prevent contamination.
  4. Disconnect the wheel speed sensor electrical connector.
    GJ0016177
  5. See figure
    GJ0016391
    6. CAUTION: Make sure that the component is clean, free of foreign material and lubricant.
    CAUTION: Make sure that the mating faces are clean and free of foreign material.
    CAUTION: Make sure that the sensor tip is clean and free of foreign material.
  6. Remove the front wheel speed sensor.
    • Torque: 8 Nm
scientia non olet · About LEMON Manuals