LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2013 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Speed Control -- XF/X260) >> Speed Control >> Adaptive Speed Control Module >> Removal And Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XF, 2017 Jaguar XF, and 2016 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
  1. G11701192
    • Install the 3 retaining bolts for the adaptive speed control module. Torque Specification: 5 Nm 
    • Connect the electrical connector.
  2. Install the front bumper. Refer to Front Bumper
  3. Connect the startup battery ground cable. Refer to Battery Disconnect And Connect
  4. Check the alignment of the speed control sensor. Refer to: Adaptive Speed Control Module Adjustment 
scientia non olet · About LEMON Manuals