DTC U2100-54: Initial Configuration Not Complete - Missing calibration: Action

WARNING: This page is about a different car, the 2018 Jaguar XF, 2017 Jaguar XF, and 2016 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Using the Jaguar Land Rover Approved Diagnostic Equipment, run diagnostic routine - Assembly Test (0x0211) - before clearing this DTC

Using the Jaguar Land Rover Approved Diagnostic Equipment, clear the DTCs and retest. If the fault persists, install a new anti-lock brake system control module