Rear Seat Module Configuration (SSM70578)
Publication date: 2013-12-18Reference number: SSM70578
REAR SEAT MODULE CONFIGURATION
TECHNICAL SERVICE BULLETIN
Reference Number(s): SSM70578, Date of Issue:
December 18, 2013
| LAND ROVER: | Range Rover (All New)/L405 |
| CATEGORY: | Electrical |
SERVICE INFORMATION
Symptom 205000 Electrical Accessories
ISSUE
Rear seat fold operation.
CAUSE
Incomplete software down load
ACTION
Content
If there is a requirement to re-configure or replace any of the rear seat modules using Symptom Driven Diagnostics (SDD) ensure that all on screen instructions are followed accurately and the software download has completed successfully. Following the download check that the software level is at the latest level and the rear seat fold operation is functioning correctly.
NOTE:
It is imperative that prior to software reconfiguration the diagnostic leads and connection between the SDD tool and the diagnostic socket have been made securely and not disturbed before or during the operation. Ensure that a Land Rover approved Power Supply/Battery Support Unit is connected to the vehicle battery before and during the download.