LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2014 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Module Communications Network -- XF/X250) >> Module Communications Network >> Description And Operation >> Communications Network - Overview (G970552)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Communications Network - Overview (G970552)

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2015 Jaguar XFR-S, 2015 Jaguar XFR, 2015 Jaguar XF, 2014 Jaguar XFR-S, and 2014 Jaguar XFR. However, it is still accessible from the selected car via links, so may be relevant.

A number of different types of communication network are incorporated into the vehicle wiring harnesses for the transmission of commands and information between control modules. The configuration installed on a particular vehicle depends on the model and equipment level.

NOTE: The control diagrams shown later in this section are schematics reflecting communications networks fitted to LH (left-hand) vehicles only. For detailed layouts of the various communications networks fitted to LHD (left-hand drive) and RHD (right-hand drive) vehicles, refer to the Electrical Guide.

The communications networks available on the vehicle are shown in the table below.

NETWORK BAUD RATE
LIN (local interconnect network) bus 9.6 kbits/s
Medium speed CAN (controller area network) bus 125 kbits/s
High speed CAN bus 500 kbits/s
Media Orientated System Transport (MOST) ring 24 mbits/s