LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2014 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Module Communications Network -- XF/X260) >> Module Communications Network >> Diagnosis And Testing >> Controller Area Network (Can) >> Control Module Connections To The Can Harness
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Control Module Connections To The Can Harness

WARNING: This page is about a different car, the 2018 Jaguar XF, 2017 Jaguar XF, and 2016 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.

Control modules are connected to the CAN harness either in a 'loop' or 'spur' configuration. In the 'loop' type configuration the CAN harness loops into the module (via two connector pins) and then loops out of the module (via another two connector pins). In the 'spur' type configuration, a harness spur is spliced into the main 'backbone' of the CAN harness and the module is connected to the harness spur via two connector pins.

scientia non olet · About LEMON Manuals