DTC C2005-77: Right Actuator - Commanded position not reachable: Action
- Check the battery supply voltage
- Check that the right electric park brake actuator, brake disc or brake pads are installed correctly. Repair as required
- Refer to the appropriate system wiring diagrams and check the right electric park brake actuator circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Repair the circuits as required
- Refer to the appropriate system wiring diagrams and check the anti-lock brake system control module power and ground circuits for open circuit, high resistance. Repair the circuits as required
- Perform an ignition cycle and retest the electric park brake, if the fault persists, install a new right electric park brake actuator as necessary