DTC B00C0-7B: Passenger Seat Occupant Classification Sensor "A" - Low fluid level: Action

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2015 Land Rover Range Rover, and 2014 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Do not try to solely change the module fitted to the bladder hose as it is calibrated as an integral assembly with the seat cushion foam

Check if bladder hose with pressure sensor is loose. Attach hose and pressure sensor to the seat in original position. Clear DTC and retest
If fault persists, check if the seat and associated fixings are correctly installed. Rectify installation as required. Clear DTC and retest
If fault persists, check if the silicon filled bladder assembly for leaks. Clear DTC and retest
If fault persists, check and install a new occupant classification sensor service kit as required (complete service kit consists of foam, occupant classification sensor bladder mat with attached smart digital pressure sensor)