LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2020 >> Defender 110 S >> Repair and Diagnosis >> General Information >> Specifications Index >> Diagnostic Trouble Code Index DTC: Infotainment Compute Control Module (ICCM) -- Defender/L663 >> Diagnostic Trouble Code Index - DTC: Infotainment Compute Control Module (ICCM) (G2400897) >> Description And Operation >> Infotainment Compute Control Module >> DTC B115E-31: Camera Module - No signal >> Action
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC B115E-31: Camera Module - No signal: Action

  1. Check that the park assist camera view is displayed, if the camera display is visible go to step  7, if there is no camera display go to step 2
  2. Using the Jaguar Land Rover approved diagnostic equipment, perform routine - On Demand Self Test (0x0202) and read the Diagnostic Trouble Code(s). If the DTC is set go to step 3, if the DTC is no longer set go to step  9
  3. Refer to the electrical circuit diagrams and disconnect the video out cable from the near field sensing module
  4. Measure the voltage between pin 1 of the video out cable and a local ground connection on the vehicle
  5. If the voltage is less than 1.5 volts, replace the cable and go to step 6, if not reconnect the cable to the near field sensing module and go to step  7
  6. Using the Jaguar Land Rover approved diagnostic equipment, perform routine - On Demand Self Test (0x0202) and read the Diagnostic Trouble Code(s). If the DTC is set go to step 7
  7. Check the front infotainment control module software release notes to see if a repair is available and update the front infotainment control module and repeat step  2. If no software update is available go to step 8
  8. Check the near field sensing module for any internal failure Diagnostic Trouble Code(s) and follow the DTC index
  9. Check for other Diagnostic Trouble Code(s) relating to the customer concern and follow the DTC index
scientia non olet · About LEMON Manuals