DTC B115E-12: Camera Module - Circuit short to battery: Action
- Check that the park assist camera view is displayed, if the camera display is visible go to step 10, if there is no camera display go to step 2
- Using the Jaguar Land Rover approved diagnostic equipment, perform routine - On Demand Self Test (0x0202) and read the Diagnostic Trouble Code(s). If the DTC is set go to step 3, if the DTC is no longer set go to step 10
- Refer to the electrical circuit diagrams and disconnect the near field sensing module from the front infotainment control module (C5, violet connector)
- Measure the voltage between pin 1 of the near field sensing module cable and a local ground connection on the vehicle
- If the voltage is greater than 9 volts, disconnect the cable from the near field sensing module and repeat step 4 measurement, if not go to step 7
- If the voltage is greater than 9 volts after step 5, rectify the short circuit as necessary, replace the cable and repeat step 2, if not go to step 11
- Reconnect the cable to the front infotainment control module and disconnect from the near field sensing module only
- Repeat step 4 measurement, if the voltage is greater than 9 volts, go to step 11, if not go to step 9
- Check the front infotainment control module software release notes to see if a repair is available and update the front infotainment control module and repeat step 2. If no software update is available go to step 10
- Check for other related Diagnostic Trouble Code(s) and refer to the relevant DTC index
- Check the near field sensing module for any internal failure Diagnostic Trouble Code(s) and follow the DTC index