DTC C2007-19: Right Motor - Circuit current above threshold: Action
- Refer to the electrical circuit diagrams and check the right electric park brake actuator circuits for short circuit to ground, short circuit to power. Repair the circuits as required
- Actuator blocked, motor short circuit, harness short circuit
- Check the power line and any connectors between the right actuator and control unit for short circuit
- Check the failure memory for host failures related to the control of the right actuator and follow the repair instructions
- Perform ignition change and delete failure memory (switch the Ignition OFF and back ON, then clear the Diagnostic Trouble Code(s))
- Check functionality by applying and releasing the electric park brake
- If the DTC is set again, perform ignition change and delete failure memory (switch the Ignition OFF and back ON, then clear the Diagnostic Trouble Code(s))
- Connect right actuator with the left side cable and vice versa and apply and release the electric park brake. If the failure DTC C2008-19 is set: exchange (original) right actuator. If the failure DTC C2007-19 is set: Double-check power line of the right actuator for short circuit