DTC C2008-13: Left Motor - Circuit open: Action

Refer to the electrical circuit diagrams and check the left electric park brake actuator circuit for open circuit, high resistance
Check the power line and connectors between the left actuator and HW driver control
Check the failure memory for host failures related to the control of the left actuator and follow the repair instructions
Perform ignition change and delete failure memory (switch the Ignition OFF and back ON, then clear the Diagnostic Trouble Code(s))
Check functionality by applying and releasing the electric park brake
If the DTC is set again, perform ignition change and delete failure memory (switch the Ignition OFF and back ON, then clear the Diagnostic Trouble Code(s))
Connect right actuator with the left side cable and vice versa and apply and release the electric park brake. If the failure C2007-13 is set: exchange (original) left actuator. If the failure C2008-13 is set: search for failures in the power line between host and left actuator and in the control of the left actuator (HOST)