DTC U0110-87: Lost Communication With Drive Motor Control Module A - Missing message: Action
NOTE:
Do NOT replace the anti-lock brake system control module for this DTC only
- Make sure that all ECUs of the vehicle are connected to the network. Refer to the electrical circuit diagrams and check the FlexRay bus circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Refer to the electrical circuit diagrams and check the electric power inverter converter control module power and ground circuits for open circuit, high resistance. Repair the wiring harness as required
- Perform an ignition cycle, clear the DTC and retest, if the problem persists contact JLR technical assistance