DTC U201A-56: Control Module Main Calibration Data - Invalid/Incompatible configuration: Action
NOTE:
After updating the Car Configuration file, lock the vehicle and wait for 5 minutes. Unlock the vehicle, set the ignition to On and wait for 3 minutes before reading the Diagnostic Trouble Code(s)
- Using the Jaguar Land Rover approved diagnostic equipment, check and update the Car Configuration file as necessary. Clear the Diagnostic Trouble Code(s) and retest
- Using the Jaguar Land Rover approved diagnostic equipment, check the gateway module for related Diagnostic Trouble Code(s) and refer to the relevant DTC index