Pathfinder Fails To Complete The 'Replace ECIT Application For The Powertrain Control Module (Pcm) (SSM75130)
WARNING: This page is about the Defender 110, which is a different variant/trim than selected.
Publication date: 2020-11-12Reference number: SSM75130
PATHFINDER FAILS TO COMPLETE THE 'REPLACE ECIT APPLICATION FOR THE POWERTRAIN CONTROL MODULE (PCM)
TECHNICAL SERVICE BULLETIN
Reference Number(s): SSM75130, Date of Issue:
November 12, 2020
| LAND ROVER: | Defender/L663; Discovery Sport/L550; New Range Rover Evoque/L551; Range Rover/L405; Range Rover Evoque/L538; Range Rover Sport/L494 |
| SERVICE CATEGORY: | Diagnostic Software Hardware |
ISSUE
When attempting to complete the "Replace ECU" application for the Powertrain Control Module (PCM) within PATHFINDER, the application finishes with the error message: "Sub-Function Not Supported"
CAUSE
If the original module is damaged and PATHFINDER is unable to communicate with it, or if the new module has been fitted at the start of the session without extracting any data from the original module
PERMANENT CORRECTIVE ACTION
This concern has been resolved with the release of PATHFINDER version 306. The manual patch will no longer be available to download and this SSM will be deleted in 7 days.