DTC C2007-18: Right Motor - Circuit current below threshold: Action
- Check the integrity of the brake disc and brake pads and that the electric park brake right actuator is correctly installed
- Perform ignition change and delete failure memory (switch the Ignition OFF and back ON, then clear the Diagnostic Trouble Code(s))
- Refer to the electrical circuit diagrams and check the electric park brake right actuator circuits for correct polarity and for open circuit, high resistance. Repair the circuits as required
- Refer to the electrical circuit diagrams and check the anti-lock brake system control module power and ground circuits for open circuit, high resistance. Repair the circuits as required
- Using the Jaguar Land Rover Approved Diagnostic Equipment, clear the Diagnostic Trouble Code(s), then apply and release the park brake and retest. If the fault persists, install a new electric park brake right actuator