Keyless Entry: Service and Repair

Flowchart (Part 1 Of 3):

Flowchart (Part 2 Of 3):

Flowchart (Part 3 Of 3):

REGISTRATION OF RECOGNITION CODE

A maximum of 4 recognition codes can be registered using the following 4 modes.

(1) Reprogram Mode: Currently registered codes are all erased and only the new recognition codes are registered.

(2) Addition Mode: Currently registered codes are retained, and new recognition codes are also registered.

Note: If the number of registered codes exceeds 4, previously registered codes are erased in order, starting from the oldest code.

(3) Confirmation Mode: The number of codes that are currently registered can be confirmed.

(4) Erase Mode: All the registered codes are erased. (The wireless door lock function is annulled.)

Register the recognition code according to the flow chart.