Stoplight Switch
- Disconnect 4-pin stoplight switch connector. See Figure. Depress brake pedal (stoplight switch pin free). Ensure continuity exists between stoplight switch connector terminals No. 1 (Green/White wire) and No. 2 (Green/Orange wire). If continuity does not exist, replace stoplight switch and retest system. If continuity exists, go to next step.
- Release brake pedal (stoplight switch pin pushed in). Ensure continuity exists between stoplight switch connector terminals No. 3 (Black/Red wire) and No. 4 (Red/Green wire). If continuity does not exist, replace stoplight switch and retest system.