Control Assembly: Service and Repair

COMPONENTS

REMOVAL

1. REMOVE CENTER LOWER CLUSTER FINISH PANEL




2. REMOVE INTEGRATION CONTROL PANEL
Remove the 4 bolts and pull out the panel, then disconnect the connector.

3. REMOVE MULTI DISPLAY
Remove the 3 screws and multi display.

4. REMOVE RADIO
Remove the 4 screws and radio.

5. REMOVE PANEL ECU
Remove the 6 screws and ECU.

6. HEATER CONTROL
Remove the 15 screws and heater control.

7. REMOVE KNOBS
8. REMOVE PLATE

INSTALLATION
Installation Is in the reverse order of removal.