Crankshaft Position Sensor: Testing and Inspection
INSPECTIONCRANK POSITION SENSOR NO.1 (RH CYLINDER)
a. Using an ohmmeter, measure the resistance between terminals.
RESISTANCE:
at cold 835 - 1,400 Ohms
at hot 1,060 - 1,645 Ohms
NOTE: "Cold" and "Hot" on the table express the temperature of the coils themselves. "Cold" is from -10 °C (14 °F) to 50 °C (122 °F) and "Hot" is from 50 °C (122 °F) to 100 °C (212 °F).
CRANK POSITION SENSOR
a. Using an ohmmeter, measure the resistance between terminals.
RESISTANCE:
at cold 1,630 - 2,740 Ohms
at hot 2,065 - 3,225 Ohms
NOTE: "Cold" and "Hot" on the table express the temperature of the coils themselves. "Cold" is from -10 °C (14 °F) to 50 °C (122 °F) and "Hot" is from 50 °C (122 °F) to 100 °C (212 °F).