LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2003 >> ES 300 >> Repair and Diagnosis >> External Pages >> Different car >> Section 420 (Battery System) >> Battery Cables >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Battery Cables: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the battery cable in the vehicle.
  2. One at a time, trace and install the battery cable, retaining fasteners and routing clips until the desired cable is properly installed in the engine wire harness assembly.
  3. Install the tape on the engine wire harness assembly.
  4. Connect the positive battery cable terminal. Torque to 40 in. lbs.
  5. Connect the negative battery cable terminal. Torque to 40 in. lbs.
scientia non olet · About LEMON Manuals