Inspection Procedure

WARNING: This page is about a different car, the 2003 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

Check Back Door Power Window Operation
1. Check that the back door power window operates via the back door power window switch.
1. OK : Go To Next Step.
2. NG : Another Problem (See DTC B1241 BODY ECU SWITCH CIRCUIT DIAGNOSIS )
Inspect Tail Gate Control Switch Assy
1. Disconnect the switch connector.
2. Insert the key to the switch.
3. Check the continuity between the terminals of the switch connector when turning the key.
  
  Fig 1: Inspecting Tail Gate Control Switch Assy
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Standard:
  
  Fig 2: Tail Gate Control Switch Specifications Table
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. NG : Replace Tail Gate Control Switch Assy
2. OK : Repair Or Replace Harness And Connector (Back Door ECU >--< Switch)