Inspection Procedure

WARNING: This page is about a different car, the 2004 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

CHECK BACK DOOR POWER WINDOW OPERATION
1. Check that the back door power window operates via the back door power window switch.
NG: OTHER PROBLEM (See MANUAL UP/DOWN FUNCTION DOES NOT OPERATE )

OK: Go To Next Step

INSPECT TAIL GATE CONTROL SWITCH ASSY (BACK DOOR LOCK KEY CYLINDER)

Disconnect the switch connector.
Insert the key into the key cylinder.
Check the continuity between the terminals of the switch connector when turning the key.

Fig 1: Inspecting Tail Gate Control Switch Assy (Back Door Lock Key Cylinder)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

STANDARD

Terminal No.	Operation	Specified Condition
1 <=> 3	Turn key to right	Continuity
1 <=> 2	No operation	No continuity
2 <=> 3	Turn key to left	Continuity

NG: REPLACE TAIL GATE CONTROL SWITCH ASSY

OK: REPAIR OR REPLACE HARNESS AND CONNECTOR (BACK DOOR ECU <=> SWITCH)