Power Door Lock Control System - Diagnosis: Pre-Check
- INSPECT ECU DATA MONITOR WITH HAND-HELD TESTER
- The ECU data monitor will indicate if the part is normal or malfunctioning.
Standard:
Transponder key ECU (switch condition)
TRANSPONDER KEY ECU SWITCH CONDITIONItem Inspecting condition Standard value KEYSW IG ON --> Without key ON -->OFF Standard:
Door ECU (for driver's seat and passenger's seat) (switch condition)
DRIVER'S AND PASSENGER'S SEAT SWITCH CONDITIONItem Inspecting condition Standard value Lock position switch Unlocked / Locked ON / OFF Courtesy switch Door opened/ Closed ON/OFF - The ECU data monitor will indicate if the part is normal or malfunctioning.
- INSPECT ACTIVE TEST WITH HAND-HELD TESTER
- The active test will indicate if the part is normal or malfunctioning.
Standard:
Door ECU (for driver's seat and passenger's seat)
MOTOR CONDITIONItem Motor Door lock LOCK/UNLOCK - The active test will indicate if the part is normal or malfunctioning.
- INSPECT CUSTOMIZING FUNCTION WITH HAND-HELD TESTER (REFERENCE)
- Makes it possible to select the following controls on door lock switch.
Standard:
Theft warning ECU
DOOR LOCK SWITCH CONDITIONItem Motor Unlocked by 2 operations of driver's door Without function / Driver's door opened for the 1st operation Unlocked when shifted into P range With/Without Auto-lock by detection of vehicle's speed With/Without Locked when shifted from P range except P range With function / With or without condition of stop light OFF / without function - Makes it possible to select the following controls on door lock switch.