Section 201 (Television Camera): Replacement

WARNING: This page is about a different car, the 2004 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For component location: See COMPONENTS .

REMOVE BACK DOOR GARNISH CENTER
BACK DOOR: (See OVERHAUL )

POWER BACK DOOR: (See OVERHAUL )
REMOVE BACK DOOR SIDE GARNISH LH
BACK DOOR: (See OVERHAUL )

POWER BACK DOOR: (See OVERHAUL )
REMOVE BACK DOOR SIDE GARNISH RH
BACK DOOR: (See OVERHAUL )

POWER BACK DOOR: (See OVERHAUL )
REMOVE BACK DOOR PULL STRAP
BACK DOOR: (See OVERHAUL )

POWER BACK DOOR: (See OVERHAUL )
REMOVE BACK DOOR TRIM BOARD ASSY
BACK DOOR: (See OVERHAUL )

POWER BACK DOOR: (See OVERHAUL )
REMOVE BACK DOOR GARNISH SUB-ASSY OUTSIDE (See BACK DOOR GARNISH SUB-ASSY OUTSIDE )
REMOVE TELEVISION CAMERA ASSY
1. Release the 2 claw fittings and remove the television camera assy.
Fig 1: Removing Television Camera Assy
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL BACK DOOR PULL STRAP
BACK DOOR: (See OVERHAUL )

POWER BACK DOOR: (See OVERHAUL )